Now Jinan KFC door installation is more and more, in our daily life can be said to be often seen, its popularity can be said to be more and more widespread, but when it is installed, it needs to pay attention to some problems, then what exactly need to pay attention to? In view of this problem, let's listen to it. You can learn how to say that.
1. After temporary fixing of the door and window frames, before filling the gap between the wall and the door, pay attention not to make the door and window frames shift and tilt, but to remove the positioning wedge or other appliances after the door and window frames are fixed firmly.
2. Strictly protect the products during construction, timely repair and seal the damaged and falling protective adhesive paper and film, and timely remove the slurry dirt splashed on the surface of aluminium doors and windows.
3. The thickness of KFC door glass in Jinan should match with the size of fan tappet inlay groove and seal strip to meet the national standards and design requirements, and the expansion allowance should be left when the seal strip is installed.
4. Do not scratch or cut the surface of aluminium alloy profile when using tools to clean the surface of KFC doors.
5. Surface stains should be cleaned by special solvent or clean water and cotton yarn. Redundant rubber stains filled with sealant should be cleaned up in time to ensure that the finished surface of aluminium doors and windows is neat and beautiful.
肯德基门6.配件的选择， 选择配件时配件的推杆按尺寸规定,与门的规定一致,对推杆上安装所需孔进行钻孔或冲,与带有安装所需孔的传动杆配合使用。 应注意:型材构件上的钻孔、开槽、切口等工序应在门组装前完毕。配件应采用耐腐蚀材料(如不锈钢。铝合金等),在表面镀膜牌的型材上安装配件时要注意,由于两个镀膜面贴合在一起会影响滑动,所以推杆型材只进行表面氧化处理。
KFC door 6. Selection of fittings. When selecting fittings, the push rod of the fittings shall be drilled or punched in accordance with the size requirements of the door. It shall be used in conjunction with the transmission rod with the required holes for installation. It should be noted that the drilling, grooving, cutting and other processes on the profile components should be completed before the door is assembled. Corrosion resistant materials (such as stainless steel) shall be used for fittings. Aluminum alloy, etc.) When installing fittings on profiles with surface coated plates, attention should be paid to the fact that the two coated surfaces bonding together will affect sliding, so the push rod profiles are only treated by surface oxidation.
7. Installation of fittings and fixing method of fittings adopt inserting screw, taper pin or cylindrical pin into pre-made hole groove. Screw is self-tapping type. Thread drilling is only available when special needs arise. Using template and simple tools, the installation of fittings can be easy and time-saving. In addition, using template can ensure the accuracy of fittings installation.
These are some questions that we should pay attention to when installing Jinan KFC Gate. We need to pay attention to these questions when installing KFC Gate. These questions are more important ones. I hope this article can be helpful to you. If you want to know more about it, Please pay attention to our company's website updates. It's a good choice for you to consult.